The technical requirements that galvanized steel pipes should meet.

2013-07-03


1. Grade and Chemical Composition The grade and chemical composition of galvanized pipes and galvanized steel pipes should comply with the grades and chemical compositions specified for black pipes in GB3092.

2. Manufacturing Method The manufacturing method of black pipes (furnace welding or electric welding) is chosen by the manufacturer. Galvanization is done using the hot-dip galvanizing method.

3. Threads and Pipe Joints

3.1 For galvanized steel pipes delivered with threads, the threads should be machined after galvanization. The threads should comply with the provisions of YB822.

3.2 Steel pipe joints should comply with the provisions of YB238; ductile iron pipe joints should comply with the provisions of YB230.

4. Mechanical Properties The mechanical properties of steel pipes before galvanization should comply with the provisions of GB3092.

5. Uniformity of Galvanized Layer Galvanized steel pipes should undergo a test for uniformity of the galvanized layer. Steel pipe samples must not turn red (copper color) after being continuously immersed in copper sulfate solution for 5 times.

 6. Cold Bending Test Galvanized steel pipes with a nominal diameter not exceeding 50mm should undergo a cold bending test. The bending angle is 90°, and the bending radius is 8 times the outer diameter. During testing, no filler material should be used, and the weld seam of the sample should be placed on the outer side or upper part in the direction of bending. After testing, there should be no cracks or zinc layer peeling on the sample.

 7. Hydrostatic Test The hydrostatic test should be conducted on black pipes; eddy current testing can also replace hydrostatic testing. The test pressure or dimensions for eddy current comparison samples must comply with GB3092 regulations.