The manufacturing process and flow of seamless steel pipes.

2013-12-02


       SeamlessSteel pipeUsage
    SeamlessSteel pipeMainly used for water pipelines, gas pipelines, mechanical processing, scaffolding pipes used in construction, and special pipes used in military industry.Steel pipeThe ratio of outer diameter to wall thickness is less than 20Steel pipeis called thick-walledSteel pipe. Mainly used as petroleum geological drilling pipes, cracking pipes for petrochemical use, boiler pipes, bearing pipes, and high-precision structural pipes for automobiles, tractors, and aviation.
    SeamlessSteel pipeManufacturing process
    Hot rolling (extruded seamless)Steel pipe: Round pipe blank → heating → perforation → three-roll slant rolling, continuous rolling or extrusion → pipe removal → sizing (or reduction) → cooling → straightening → hydrostatic test (or flaw detection) → marking → storage.
    SeamlessSteel pipeProduction process
    The raw material for rolling seamless pipes is round pipe blanks. The round pipe blanks are cut into lengths of about 1 meter by a cutting machine and sent to the furnace for heating via a conveyor belt. The steel blank is heated in the furnace at a temperature of about 1200 degrees Celsius. The fuel is hydrogen or acetylene. Controlling the temperature in the furnace is a key issue. After the round pipe blank comes out of the furnace, it must go through a pressure perforating machine for perforation. A common type of perforating machine is the conical roller perforating machine; this type of machine has high production efficiency, good product quality, large perforation expansion capacity, and can work with various steel types. After perforation, the round pipe blank undergoes three-roll slant rolling, continuous rolling or extrusion sequentially. After extrusion, it needs to be removed from the tube and sized.Steel pipe.Steel pipeThe inner diameter is determined by the outer diameter length of the sizing machine's drill bit.Steel pipeAfter sizing, it enters a cooling tower where it cools down through water spray.Steel pipeAfter cooling, it needs to be straightened.Steel pipeAfter straightening, it is sent via conveyor belt to a metal flaw detection machine (or hydrostatic test) for internal inspection. If there are internal cracks or bubbles detected.Steel pipe内部有裂纹,气泡等问题,将被探测出。Steel pipe, quality inspection must also go through strict manual selection.Steel pipe. After quality inspection, paint is sprayed with numbers, specifications, production batch numbers etc., and then lifted into storage by a crane.