PRODUCTS CENTER
North Korea Fluid pipe
Category:
Product Description
The fluid pipe is a steel pipe with a hollow cross-section and no welds from beginning to end. The steel pipe has a hollow cross-section, and a large number of pipes used to transport fluids are used to transport oil, natural gas, gas, water and some solid materials. Compared with solid steel such as round steel, steel pipe has the same bending and torsional strength and lighter weight. It is an economical cross-section steel and is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes,automobile drive shaft,Bicycle rackand steel used in building constructionScaffoldingWait.
Implementation standard: structural pipe GB/T8162-2008 fluid pipe GB/T8163-2008 low and medium pressure boiler pipe GB3087-1999 high pressure boiler pipe GB5310-1995 high pressure fertilizer pipe GB6479-2000 petroleum cracking pipe ship pipe geological pipe accumulator pipe vehicle bridge pipe hydraulic support pipe and gas cylinder pipe and other professional pipes;
Material: 10# 20# 35# 45# Q345A-E 37Mn 34Mn2 20Mn2 27SiMn 12Cr1MoV(G) 15CrMo(G) 35CrMo 10 CrMo910;
Specifications: φ48-φ720;
Wall thickness: 3.5 mm-50mm;
| Variety | Specifications (mm） | Steel grade | Executive standards | Typical use | |
| Outside Diameter | Wall Thick | ||||
| Fluid pipe | 48-1200 | 5.1-30 | 20#、Q295、Q345 | GB/T8163 | Transport general gas, liquid, dry powder. |
: next page
Shenyang Tengfei Iron Corporation
Shenyang Tengfei Steel Pipe Co., Ltd.
Address: No.6 A 3, No.13 Road, Economic and Technological Development Zone, Shenyang City, Liaoning Province
E-mail:tfwelcome@163.com
Focus on us
